来无耻一下,贴一下XCAP的draft

妈的,都过期了还没新的出来么?SIMPLE J. RosenbergInternet-Draft Cisco SystemsExpires:

April 16, 2007

October 13, 2006 The Extensible Markup Language (XML) Configuration Access Protocol (XCAP) draft-ietf-simple-xcap-12Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as

work in progress.

The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on April 16, 2007.Copyright Notice Copyright (C) The Internet Society (2006).Abstract This specification defines the Extensible Markup Language (XML) Configuration Access Protocol (XCAP). XCAP allows a client to read, write and modify application configuration data, stored in XML format on a server. XCAP maps XML document sub-trees and element attributes to HTTP URIs, so that these components can be directly accessed by HTTP.Rosenberg Expires April 16, 2007 [Page 1] Internet-Draft XCAP October 2006Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 4 2. Overview of Operation . . . . . . . . . . . . . . . . . . . . 4 3. Terminology . . . . . . . . . . . . . . . . . . . . . . . . . 5 4. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 5 5. Application Usages . . . . . . . . . . . . . . . . . . . . . . 7 5.1. Application Unique ID (AUID) . . . . . . . . . . . . . . . 7 5.2. Default Document Namespace . . . . . . . . . . . . . . . . 8 5.3. Data Validation . . . . . . . . . . . . . . . . . . . . . 9 5.4. Data Semantics . . . . . . . . . . . . . . . . . . . . . . 10 5.5. Naming Conventions . . . . . . . . . . . . . . . . . . . . 10 5.6. Resource Interdependencies . . . . . . . . . . . . . . . . 11 5.7. Authorization Policies . . . . . . . . . . . . . . . . . . 12 5.8. Data Extensibility . . . . . . . . . . . . . . . . . . . . 12 5.9. Documenting Application Usages . . . . . . . . . . . . . . 13 5.10. Guidelines for Creating Application Usages . . . . . . . . 13 6. URI Construction . . . . . . . . . . . . . . . . . . . . . . . 15 6.1. XCAP Root . . . . . . . . . . . . . . . . . . . . . . . . 15 6.2. Document Selector . . . . . . . . . . . . . . . . . . . . 16 6.3. Node Selector . . . . . . . . . . . . . . . . . . . . . . 18 6.4. Namespace Bindings for the Selector . . . . . . . . . . . 23 7. Client Operations . . . . . . . . . . . . . . . . . . . . . . 24 7.1. Create or Replace a Document . . . . . . . . . . . . . . . 25 7.2. Delete a Document . . . . . . . . . . . . . . . . . . . . 26 7.3. Fetch a Document . . . . . . . . . . . . . . . . . . . . . 26 7.4. Create or Replace an Element . . . . . . . . . . . . . . . 26 7.5. Delete an Element . . . . . . . . . . . . . . . . . . . . 28 7.6. Fetch an Element . . . . . . . . . . . . . . . . . . . . . 29 7.7. Create or Replace an Attribute . . . . . . . . . . . . . . 30 7.8. Delete an Attribute . . . . . . . . . . . . . . . . . . . 31 7.9. Fetch an Attribute . . . . . . . . . . . . . . . . . . . . 31 7.10. Fetch Namespace Bindings . . . . . . . . . . . . . . . . . 32 7.11. Conditional Operations . . . . . . . . . . . . . . . . . . 32 8. Server Behavior . . . . . . . . . . . . . . . . . . . . . . . 34 8.1. POST Handling . . . . . . . . . . . . . . . . . . . . . . 35 8.2. PUT Handling . . . . . . . . . . . . . . . . . . . . . . . 35 8.2.1. Locating the Parent . . . . . . . . . . . . . . . . . 35 8.2.2. Verifying Document Content . . . . . . . . . . . . . . 36 8.2.3. Creation . . . . . . . . . . . . . . . . . . . . . . . 37 8.2.4. Replacement . . . . . . . . . . . . . . . . . . . . . 41 8.2.5. Validation . . . . . . . . . . . . . . . . . . . . . . 42 8.2.6. Conditional Processing . . . . . . . . . . . . . . . . 43 8.2.7. Resource Interdependencies . . . . . . . . . . . . . . 44 8.3. GET Handling . . . . . . . . . . . . . . . . . . . . . . . 44 8.4. DELETE Handling . . . . . . . . . . . . . . . . . . . . . 45 8.5. Managing Etags . . . . . . . . . . . . . . . . . . . . . . 46 9. Cache Control . . . . . . . . . . . . . . . . . . . . . . . . 46Rosenberg Expires April 16, 2007 [Page 2] Internet-Draft XCAP October 2006 10. Namespace Binding Format . . . . . . . . . . . . . . . . . . . 47 11. Detailed Conflict Reports . . . . . . . . . . . . . . . . . . 47 11.1. Document Structure . . . . . . . . . . . . . . . . . . . . 48 11.2. XML Schema . . . . . . . . . . . . . . . . . . . . . . . . 49 12. XCAP Server Capabilities . . . . . . . . . . . . . . . . . . . 53 12.1. Application Unique ID (AUID) . . . . . . . . . . . . . . . 54 12.2. XML Schema . . . . . . . . . . . . . . . . . . . . . . . . 54 12.3. Default Document Namespace . . . . . . . . . . . . . . . . 55 12.4. MIME Type . . . . . . . . . . . . . . . . . . . . . . . . 55 12.5. Validation Constraints . . . . . . . . . . . . . . . . . . 55 12.6. Data Semantics . . . . . . . . . . . . . . . . . . . . . . 56 12.7. Naming Conventions . . . . . . . . . . . . . . . . . . . . 56 12.8. Resource Interdependencies . . . . . . . . . . . . . . . . 56 12.9. Authorization Policies . . . . . . . . . . . . . . . . . . 56 13. Examples . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 14. Security Considerations . . . . . . . . . . . . . . . . . . . 59 15. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 60 15.1. XCAP Application Unique IDs . . . . . . . . . . . . . . . 60 15.2. MIME Types . . . . . . . . . . . . . . . . . . . . . . . . 61 15.2.1. application/xcap-el+xml MIME Type . . . . . . . . . . 61 15.2.2. application/xcap-att+xml MIME Type . . . . . . . . . . 62 15.2.3. application/xcap-ns+xml MIME Type . . . . . . . . . . 63 15.2.4. application/xcap-error+xml MIME Type . . . . . . . . . 64 15.2.5. application/xcap-caps+xml MIME Type . . . . . . . . . 65 15.3. URN Sub-Namespace Registrations . . . . . . . . . . . . . 66 15.3.1. urn:ietf:params:xml:ns:xcap-error . . . . . . . . . . 66 15.3.2. urn:ietf:params:xml:ns:xcap-caps . . . . . . . . . . . 66 15.4. XML Schema Registrations . . . . . . . . . . . . . . . . . 67 15.4.1. XCAP Error Schema Registration . . . . . . . . . . . . 67 15.4.2. XCAP Capabilities Schema Registration . . . . . . . . 67 16. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 68 17. References . . . . . . . . . . . . . . . . . . . . . . . . . . 68 17.1. Normative References . . . . . . . . . . . . . . . . . . . 68 17.2. Informative References . . . . . . . . . . . . . . . . . . 70 Author

s Address . . . . . . . . . . . . . . . . . . . . . . . . . 71 Intellectual Property and Copyright Statements . . . . . . . . . . 72Rosenberg Expires April 16, 2007 [Page 3] Internet-Draft XCAP October 20061. Introduction In many communications applications, such as Voice over IP, instant messaging, and presence, it is necessary for network servers to access per-user information in the process of servicing a request. This per-user information resides within the network, but is managed by the end user themselves. Its management can be done through a multiplicity of access points, including the web, a wireless handset, or a PC application. There are many examples of per-user information. One is presence [20] authorization policy, which defines rules about which watchers are allowed to subscribe to a presentity, and what information they are allowed to access. Another is presence lists, which are lists of users whose presence is desired by a watcher [26]. One way to obtain presence information for the list is to subscribe to a resource which represents that list [21]. In this case, the Resource List Server (RLS) requires access to this list in order to process a SIP [16] SUBSCRIBE [28] request for it. Another way to obtain presence for the users on the list is for a watcher to subscribe to each user individually. In that case, it is convenient to have a server store the list, and when the client boots, it fetches the list from the server. This would allow a user to access their resource lists from different clients. This specification describes a protocol that can be used to manipulate this per-user data. It is called the Extensible Markup Language (XML) Configuration Access Protocol (XCAP). XCAP is a set of conventions for mapping XML documents and document components into HTTP URIs, rules for how the modification of one resource affects another, data validation constraints, and authorization policies associated with access to those resources. Because of this structure, normal HTTP primitives can be used to manipulate the data. XCAP is based heavily on ideas borrowed from the Application Configuration Access Protocol (ACAP) [25], but it is not an extension of it, nor does it have any dependencies on it. Like ACAP, XCAP is meant to support the configuration needs for a multiplicity of applications, rather than just a single one.2. Overview of Operation Each application (where an application refers to a use case that implies a collection of data and associated semantics) that makes use of XCAP specifies an application usage (Section 5). This application usage defines the XML schema [2] for the data used by the application, along with other key pieces of information. The principal task of XCAP is to allow clients to read, write, modify,Rosenberg Expires April 16, 2007 [Page 4] Internet-Draft XCAP October 2006 create and delete pieces of that data. These operations are supported using HTTP/1.1 [6]. An XCAP server acts as a repository for collections of XML documents. There will be documents stored for each application. Within each application, there are documents stored for each user. Each user can have a multiplicity of documents for a particular application. To access some component of one of those documents, XCAP defines an algorithm for constructing a URI that can be used to reference that component. Components refer to any element or attribute within the document. Thus, the HTTP URIs used by XCAP point to a document, or to pieces of information that are finer grained than the XML document itself. An HTTP resource which follows the naming conventions and validation constraints defined here is called an XCAP resource. Since XCAP resources are also HTTP resources, they can be accessed using HTTP methods. Reading an XCAP resource is accomplished with HTTP GET, creating or modifying one is done with HTTP PUT, and removing one of the resources is done with an HTTP DELETE. XCAP resources do not represent processing scripts; as a result, POST operations to HTTP URIs representing XCAP resources are not defined. Properties that HTTP associates with resources, such as entity tags, also apply to XCAP resources. Indeed, entity tags are particularly useful in XCAP, as they allow a number of conditional operations to be performed. XML documents which are equivalent for the purposes of many applications may differ in their physical representation. With XCAP resources, the canonical form with comments [19] of an XML document determines the logical equivalence. In other words, the canonical specification determines, how significant whitespace MUST be processed and for example, that new inserted attributes may appear in any order within the physical representation.3. Terminology In this document, the key words

MUST

,

MUST NOT

,

REQUIRED

,

SHALL

,

SHALL NOT

,

SHOULD

,

SHOULD NOT

,

RECOMMENDED

,

MAY

, and

OPTIONAL

are to be interpreted as described in RFC 2119 [7] and indicate requirement levels for compliant implementations.4. Definitions The following terms are used throughout this document:Rosenberg Expires April 16, 2007 [Page 5] Internet-Draft XCAP October 2006 XCAP Resource: An HTTP resource representing an XML document, an element within an XML document, or an attribute of an element within an XML document that follows the naming and validation constraints of XCAP. XCAP Server: An HTTP server that understands how to follow the naming and validation constraints defined in this specification. XCAP Client: An HTTP client that understands how to follow the naming and validation constraints defined in this specification. Application: A collection of software components within a network whose operation depends on data managed and stored on an XCAP server. Application Usage: Detailed information on the interaction of an application with the XCAP server. Application Unique ID (AUID): A unique identifier within the namespace of application unique IDs created by this specification that differentiates XCAP resources accessed by one application from XCAP resources accessed by another. Naming Conventions: The part of an application usage that specifies well-known URIs used by an application, or more generally, specifies the URIs that are typically accessed by an application during its processing. XCAP User Identifier (XUI): The XUI is a string, valid as a path element in an HTTP URI, that is associated with each user served by the XCAP server. XCAP Root: A context that contains all of the documents across all application usages and users that are managed by the server. Document Selector: A sequence of path segments, with each segment being separated by a

/

, that identify the XML document within an XCAP root that is being selected. Node Selector: A sequence of path segments, with each segment being separated by a

/

, that identify the XML node (element or attribute) being selected within a document. Node Selector Separator: A single path segment equal to two tilde characters

~~

that is used to separate the document selector from the node selector within an HTTP URI.Rosenberg Expires April 16, 2007 [Page 6] Internet-Draft XCAP October 2006 Document URI: The HTTP URI containing the XCAP root and document selector, resulting in the selection of a specific document. As a result, performing a GET against the document URI would retrieve the document. Node URI: The HTTP URI containing the XCAP root, document selector, node selector separator and node selector, resulting in the selection of a specific XML node. XCAP Root URI: An HTTP URI that representing the XCAP root. Although a syntactically valid URI, the XCAP Root URI does not correspond to an actual resource on an XCAP server. Actual resources are created by appending additional path information to the XCAP Root URI. Global Tree: A URI that represents the parent for all global documents for a particular application usage within a particular XCAP root. Home Directory: A URI that represents the parent for all documents for a particular user for a particular application usage within a particular XCAP root. Positional Insertion: A PUT operation that results in the insertion of a new element into a document such that its position relative to other children of the same parent is set by the client.5. Application Usages Each XCAP resource on a server is associated with an application. In order for an application to use those resources, application specific conventions must be specified. Those conventions include the XML schema that defines the structure and constraints of the data, well known URIs to bootstrap access to the data, and so on. All of those application specific conventions are defined by the application usage.5.1. Application Unique ID (AUID) Each application usage is associated with a name, called an Application Unique ID (AUID). This name uniquely identifies the application usage within the namespace of application usages, and is different from AUIDs used by other applications. AUIDs exist in one of two namespaces. The first namespace is the IETF namespace. This namespace contains a set of tokens, each of which is registered with IANA. These registrations occur with the publication of standards track RFCs [27] based on the guidelines in Section 15. The secondRosenberg Expires April 16, 2007 [Page 7] Internet-Draft XCAP October 2006 namespace is the vendor-proprietary namespace. Each AUID in that namespace is prefixed with the reverse domain name of the organization creating the AUID, followed by a period, followed by any vendor defined token. As an example, the example.com domain can create an AUID with the value

com.example.foo

but cannot create one with the value

org.example.foo

. AUIDs within the vendor namespace do not need to be registered with IANA. The vendor namespace is also meant to be used in lab environments where no central registry is needed. The syntax for AUIDs, expressed in ABNF [12] (and using some of the BNF defined in RFC 3986 [13]) is: AUID = global-auid / vendor-auid global-auid = auid auid = 1*auid-char vendor-auid = rev-hostname

.

auid rev-hostname = toplabel *(

.

domainlabel ) domainlabel = alphanum / alphanum *( alphanum /

) alphanum toplabel = ALPHA / ALPHA *( alphanum /

) alphanum auid-char = auid-unreserved / pct-encoded / sub-delims /

:

/

@

auid-unreserved = ALPHA / DIGIT /

/

_

/

~

The allowed characters for the auid production is a subset of the pchar production defined in RFC3986. In particular, it omits the

.

, which allows for the auid to be separated from the reverse hostname.5.2. Default Document Namespace In order for the XCAP server to match a URI to an element or attribute of a document, any XML namespace prefixes used within the URI must be expanded [3]. This expansion requires a namespace binding context. That context maps namespace prefixes to namespace URIs. It also defines a default namespace that applies to elements in the URI without namespace prefixes. The namespace binding context comes from two sources. Firstly, the mapping of namespace prefixes to namespace URIs is obtained from the URI itself (see Section 6.4). However, the default document namespace is defined by the application usage itself, and applies to all URIs referencing resources within that application usage. All application usages MUST define a namespace URI that represents the default document namespace to be used when evaluating URIs. The default document namespace does not apply to elements or attributes within the documents themselves – it applies only to the evaluation of URIs within that application usage. Indeed, the term

default document namespace

is distinct from the term

default namespace

. The latter has the standard meaning withinRosenberg Expires April 16, 2007 [Page 8] Internet-Draft XCAP October 2006 XML documents, and the former refers to the default used in evaluation of XCAP URIs. XCAP does not change in any way the mechanisms for determining the default namespace within XML documents. However, if a document contains a URI representing an XCAP resource, the default document namespace defined by the application usage applies to that URI as well.5.3. Data Validation One of the responsibilities of an XCAP server is to validate the content of each XCAP resource when an XCAP client tries to modify one. This is done using two mechanisms. Firstly, all application usages MUST describe their document contents using XML schema [2]. The application usage MUST also identify the MIME type for documents compliant to that schema. Unfortunately, XML schemas cannot represent every form of data constraint. As an example, one XML element may contain an integer which defines the maximum number of instances of another element. This constraint cannot be represented with XML schema. However, such constraints may be important to the application usage. The application usage defines any additional constraints beyond those in the schema. Of particular importance are uniqueness constraints. In many cases, an application will require that there only be one instance of some element or attribute within a particular scope. Each uniqueness constraint needs to be specified by identifying the field, or combinations of fields, that need to be unique, and then identifying the scope in which that uniqueness applies. One typical scope is the set of all elements of a certain name within the same parent. Another typical scope is the set of all URIs valid within a particular domain. In some cases these constraints can be specified using XML schema, which provides the

unique

element for this purpose. Other uniqueness constraints, such as URI uniqueness across a domain, cannot be expressed by schema. Whether or not the schema is used to express some of the uniqueness requirements, the application usage MUST specify all uniqueness requirements when it defines its data validation needs. For example, the resource lists application usage [22] requires that each

list

element have a unique value for the

name

attribute within a single parent. As another example, the RLS services application usage [22] requires that the value of the

uri

attribute of the

service

element be a URI that is unique within the domain of the URI. URI constraints represent another form of constraints. These areRosenberg Expires April 16, 2007 [Page 9] Internet-Draft XCAP October 2006 constraints on the scheme or structure of the scheme specific part of the URI. These kinds of constraints cannot be expressed in an XML schema. If these constraints are important to an application usage, they need to be explicitly called out. Another important data constraint is referential integrity. Referential integrity is important when the name or value of an element or attribute is used as a key to select another element or attribute. An application usage MAY specify referential integrity constraints. However, XCAP servers are not a replacement for Relational Database Management Systems (RDBMS), and therefore clients MUST NOT depend on servers to maintain referential integrity. XCAP clients are responsible for making all of the appropriate changes to documents in order to maintain referential integrity. Another constraint is character encoding. XML allows documents to be encoded using several different character sets. However, this specification mandates that all documents used with XCAP MUST be encoded using UTF-8. This cannot be changed by an application usage. The data validation information is consumed by both clients, which use them to make sure they construct requests that will be accepted by the server, and by servers, which validate the constraints when they receive a request (with the exception of referential integrity constraints, which are not validated by the server).5.4. Data Semantics For each application usage, the data present in the XML document has a well defined semantic. The application usage defines that semantic, so that a client can properly construct a document in order to achieve the desired result. They are not used by the server, as it is purposefully unaware of the semantics of the data it is managing. The data semantics are expressed in English prose by the application usage. One particularly important semantic is the base URI to be used for the resolution of any relative URI references pointed to XCAP resources. As discussed below, relative URI references pointing to XCAP resources cannot be resolved using the retrieval URI as the base URI. Therefore, it is up to the application usage to specify the base URI.5.5. Naming Conventions In addition to defining the meaning of the document in the context of a particular application, an application usage has to specify how the applications obtain the documents they need. In particular, it needsRosenberg Expires April 16, 2007 [Page 10] Internet-Draft XCAP October 2006 to define any well-known URIs used for bootstrapping purposes, and document any other conventions on the URIs used by an application. It should also document how documents reference each other. These conventions are called naming conventions. For many application usages, users need only a single document. In such a case, it is RECOMMENDED that the application usage require that this document be called

index

and exist within the users home directory. As an example, the RLS services application usage allows an RLS to obtain the contents of a resource list when the RLS receives a SUBSCRIBE request for a SIP URI identifying an RLS service. The application usage specifies that the list of service definitions is present within a specific document with a specific name within the global tree. This allows the RLS to perform a single XCAP request to fetch the service definition for the service associated with the SIP URI in a SUBSCRIBE request. Naming conventions are used by XCAP clients to construct their URIs. The XCAP server does not make use of them.5.6. Resource Interdependencies When a user modifies an XCAP resource, the content of many other resources is affected. For example, when a user deletes an XML element within a document, it does so by issuing a DELETE request against the URI for the element resource. However, deleting this element also deletes all child elements and their attributes, each of which is also an XCAP resource. As such, manipulation of one resource affects the state of other resources. For the most part, these interdependencies are fully specified by the XML schema used by the application usage. However, in some application usages, there is a need for the server to relate resources together, and such a relationship cannot be specified through a schema. This occurs when changes in one document will affect another document. Typically, this is the case when an application usage is defining a document that acts as a collection of information defined in other documents. As an example, when a user creates a new RLS service (that is, it creates a new

service

element within an RLS services document), the server adds that element to a read-only global list of services maintained by the server in the global tree. This read-only global list is accessed by the RLS when processing a SIP SUBSCRIBE request. Resource interdependencies are used by both XCAP clients and servers.Rosenberg Expires April 16, 2007 [Page 11] Internet-Draft XCAP October 20065.7. Authorization Policies By default, each user is able to access (read, modify, and delete) all of the documents below their home directory, and any user is able to read documents within the global directory. However, only trusted users, explicitly provisioned into the server, can modify global documents. The application usage can specify a different authorization policy that applies to all documents associated with that application usage. An application usage can also specify whether another application usage is used to define the authorization policies. An application usage for setting authorization policies can also be defined subsequent to the definition of the the main application usage. In such a case, the main application usage needs only to specify that such a usage will be defined in the future. If an application usage does not wish to change the default authorization policy, it can merely state that the default policy is used. The authorization policies defined by the application usage are used by the XCAP server during its operation.5.8. Data Extensibility An XCAP server MUST understand an application usage in order to process an HTTP request made against a resource for that particular application usage. However, it is not required for the server to understand all of the contents of a document used by an application usage. A server is required to understand the baseline schema defined by the application usage. However, those schemas can define points of extensibility where new content can be added from other namespaces and corresponding schemas. Sometimes, the server will understand those namespaces and therefore have access to their schemas. Sometimes, it will not. A server MUST allow for documents that contain elements from namespaces not known to the server. In such a case, the server cannot validate that such content is schema compliant; it will only verify that the XML is well-formed. If a client wants to verify that a server supports a particular namespace before operating on a resource, it can query the server for its capabilities using the XCAP Capabilities application usage, discussed in Section 12.Rosenberg Expires April 16, 2007 [Page 12] Internet-Draft XCAP October 20065.9. Documenting Application Usages Application usages are documented in specifications which convey the information described above. In particular, an application usage specification MUST provide the following information: o Application Unique ID (AUID): If the application usage is meant for general use on the Internet, the application usage MUST register the AUID into the IETF tree using the IANA procedures defined in Section 15. o XML Schema o Default Document Namespace o MIME Type o Validation Constraints o Data Semantics o Naming Conventions o Resource Interdependencies o Authorization Policies5.10. Guidelines for Creating Application Usages The primary design task when creating a new application usage is to define the schema. Although XCAP can be used with any XML document, intelligent schema design will improve the efficiency and utility of the document when it is manipulated with XCAP. XCAP provides three fundamental ways to select elements amongst a set of siblings – by the expanded name of the element, by its position, or by the value of a specific attribute. Positional selection always allows a client to get exactly what it wants. However, it requires a client to cache a copy of the document in order to construct the predicate. Furthermore, if a client performs a PUT, it requires the client to reconstruct the PUT processing that a server would follow in order to update its local cached copy. Otherwise, the client will be forced to re-GET the document after every PUT, which is inefficient. As such, it is a good idea to design schemas such that common operations can be performed without requiring the client to cache a copy of the document. Without positional selection, a client can pick the element at eachRosenberg Expires April 16, 2007 [Page 13] Internet-Draft XCAP October 2006 step by its expanded name or the value of an attribute. Many schemas include elements that can be repeated within a parent (often, minOccurs equals zero or one, and maxOccurs is unbounded). As such, all of the elements have the same name. This leaves the attribute value as the only way to select an element. Because of this, if an application usage expects user to manipulate elements or attributes that are descendants of an element which can repeat, that element SHOULD include, in its schema, an attribute which can be suitably used as a unique index. Furthermore, the naming conventions defined by that application usage SHOULD specify this uniqueness constraint explicitly. URIs often make a good choice for such unique index. They have fundamental uniqueness properties, and are also usually of semantic significance in the application usage. However, care must be taken when using a URI as an attribute value. URI equality is usually complex. However, attribute equality is performed by the server using XML rules, which are based on case sensitive string comparison. Thus, XCAP will match URIs based on lexical equality, not functional equality. In such cases, an application usage SHOULD consider these implications carefully. XCAP provides the ability of a client to operate on a single element, attribute or document at a time. As a result, it may be possible that common operations the client might perform will require a sequence of multiple requests. This is inefficient, and introduces the possibility of failure conditions when another client modifies the document in the middle of a sequence. In such a case, the client will be forced to detect this case using entity tags (discussed below in Section 7.11), and undo its previous changes. This is very difficult. As a result, the schemas SHOULD be defined so that common operations generally require a single request to perform. Consider an example. Lets say an application usage is defining permissions for users to perform certain operations. The schema can be designed in two ways. The top level of the tree can identify users, and within each user, there can be the permissions associated with the user. In an alternative design, the top level of the tree identifies each permission, and within that permission, the set of users who have it. If, in this application usage, it is common to change the permission for a user from one value to another, the former schema design is better for xcap; it will require a single PUT to make such a change. In the latter case, either the entire document needs to be replaced (which is a single operation), or two PUT operations need to occur – one to remove the user from the old permission, and one to add the user to the new permission.Rosenberg Expires April 16, 2007 [Page 14] Internet-Draft XCAP October 2006 Naming conventions form another key part of the design of an application usage. The application usage should be certain that XCAP clients know where to

start

to retrieve and modify documents of interest. Generally, this will involve the specification of a well- known document at a well-known URI. That document can contain references to other documents that the client needs to read or modify.6. URI Construction In order to manipulate an XCAP resource, the data must be represented by an HTTP URI. XCAP defines a specific naming convention for constructing these URIs. The URI is constructed by concatenating the XCAP root with the document selector with the node selector separator with a percent-encoded form of the node selector. This is followed by an optional query component that defines namespace bindings used in evaluating the URI. The XCAP root is the enclosing context in which all XCAP resources live. The document selector is a path that identifies a document within the XCAP root. The node selector separator is a path segment with a value of double tilde (

~~

), and SHOULD NOT be percent-encoded, as advised in Section 2.3 of RFC 3986 [13]. URIs containing %7E%7E should be normalized to ~~ for comparison; they are equivalent. The node selector separator is piece of syntactic sugar that separates the document selector from the node selector. The node selector is an expression that identifies a component of the document, such as an element or attribute. The sections below describe these components in more detail.6.1. XCAP Root The root of the XCAP hierarchy is called the XCAP root. It defines the context in which all other resources exist. The XCAP root is represented with an HTTP URI, called the XCAP Root URI. This URI is a valid HTTP URI; however, it doesn

t point to any resource that actually exists on the server. Its purpose is to identify the root of the tree within the domain where all XCAP documents are stored. It can be any valid HTTP URI, but MUST NOT contain a query component (a complete XCAP URI may have a query component, but it is not part of the XCAP root URI). It is RECOMMENDED that it be equal to xcap.domain where domain is the domain of the provider. As an example,

http://xcap.example.com

might be used as the XCAP root URI within the example.com domain. Typically, the XCAP root URI is provisioned into client devices. If not explicitly provisioned, clients SHOULD assume the form xcap.domain where domain is the domain of their service provider (for SIP, this would be the domain part ofRosenberg Expires April 16, 2007 [Page 15] Internet-Draft XCAP October 2006 their Address-of-Record (AOR)). A server or domain MAY support multiple XCAP root URIs. In such a case, it is effectively operating as if it were serving separate domains. There is never information carryover or interactions between resources in different XCAP root URIs. When a client generates an HTTP request to a URI identifying an XCAP resource, RFC 2616 procedures for the construction of the Request-URI apply. In particular, the authority component of the URI may not be present in the Request-URI if the request is sent directly to the origin server. The XCAP root URI can also be a relative HTTP URI. It is the responsibility of the application usage to specify the base URI for an HTTP URI representing an XCAP resource whenever such a URI appears within a document defined by that application usage. Generally speaking, it is unsafe to use the retrieval URI as the base URI. This is because any URI that points to an ancestor for a particular element or attribute can contain content including that element or attribute. If that element or attribute contained a relative URI reference, it would be resolved relative to whatever happened to be used to retrieve the content, and this will often not be the base URI defined by the application usage.6.2. Document Selector Each document within the XCAP root is identified by its document selector. The document selector is a sequence of path segments, separated by a slash (

/

). These path segments define a hierarchical structure for organizing documents within any XCAP root. The first path segment MUST be the XCAP AUID. So, continuing the example above, all of the documents used by the resource lists application would be under

http://xcap.example.com/resource-lists

. Implementors making use of HTTP servlets should be aware that XCAP may require them to get authorization from the server administrator to place resources within this specific subset of the URI namespace. It is assumed that each application will have data that is set by users, and/or it will have global data that applies to all users. As a result, beneath each AUID there are two sub-trees. One, called

users

, holds the documents that are applicable to specific users, and the other, called

global

, holds documents applicable to all users. The subtree beneath

global

is called the global tree. The path segment after the AUID MUST either be

global

or

users

. Within the

users

tree are zero or more sub-trees, each of whichRosenberg Expires April 16, 2007 [Page 16] Internet-Draft XCAP October 2006 identifies documents that apply to a specific user. Each user known to the server is associated with a username, called the XCAP User Identifier (XUI). Typically, an endpoint is provisioned with the value of the XUI. For systems that support SIP applications, it is RECOMMENDED that the XUI be equal to the Address-of-Record (AOR) for the user (i.e., sip:joe@example.com). Since SIP endpoints generally know their AOR, they will also know their XUI. As a consequence, if no XUI is explicitly provisioned, a SIP UA SHOULD assume it is equal to their AOR. This XUI MUST be used as the path segment beneath the

users

segment. Since the SIP URI allows for characters which are not permitted in HTTP URI path segments (such as the

?

and

/

characters, which are permitted in the user part of the SIP URI), any such characters MUST be percent encoded. The subtree beneath an XUI for a particular user is called their home directory.

User

in this context should be interpreted loosely; a user might correspond to device, for example. XCAP does not itself define what it means for documents to

apply

to a user, beyond specification of a baseline authorization policy, described below in Section 8. Each application usage can specify additional authorization policies which depend on data used by the application itself. The remainder of the document selector (the path following

global

or the XUI) points to specific documents for that application usage. Subdirectories are permitted, but are NOT RECOMMENDED. XCAP provides no way to create sub-directories or to list their contents, thus limiting their utility. If subdirectories are used, there MUST not be a document in a directory with the same name as a sub-directory. The final path segment in the document selector identifies the actual document in the hierarchy. This is equivalent to a filename, except that XCAP does not require that its document resources be stored as files in a file system. However, the term

filename

is used to describe the final path segment in the document selector. In traditional filesystems, the filename would have a filename extension, such as

.xml

. There is nothing in this specification that requires or prevents such extensions from being used in the filename. In some cases, the application usage will specify a naming convention for documents, and those naming conventions may or may not specify a file extension. For example, in the RLS services application usage [22], documents in the user

s home directory with the filename

index

will be used by the server to compute the global index, which is also a document with the filename

index

. Barring specific guidelines in the application usage, if a user has a single document for a particular application usage, this SHOULD be called

index

.Rosenberg Expires April 16, 2007 [Page 17] Internet-Draft XCAP October 2006 When the naming conventions in an application usage do not constrain the filename conventions (or, more generally, the document selector), an application will know the filename (or more generally, the document selector) because it is included as a reference in a document which is at a well known location. As another example, within the index document defined by RLS services, the

service

element has a child element called

resource-list

whose content is a URI pointing to a resource list within the users home directory. As a result, if the user creates a new document, and then references that document from a well-known document (such as the index document above), it doesn

t matter whether the user includes an extension in the filename or not, as long as the user is consistent and maintains referential integrity. As an example, the path segment

/resource-lists/users/sip:joe@example.com/index

is a document selector. Concatenating the XCAP root URI with the document selector produces the HTTP URI

http://xcap.example.com/resource-lists/users/ sip:joe@example.com/index

. In this URI, the AUID is

resource- lists

, and the document is in the user tree with the XUI

sip:joe@example.com

with filename

index

.6.3. Node Selector The node selector specifies specific nodes of the XML document which are to be accessed. A node refers to an XML element, an attribute of an element, or a set of namespace bindings. The node selector is an expression which identifies an element, attribute or set of namespace bindings. Its grammar is: node-selector = element-selector [

/

terminal-selector] terminal-selector = attribute-selector / namespace-selector / extension-selector element-selector = step *(

/

step) step = by-name / by-pos / by-attr / by-pos-attr / extension-selector by-name = NameorAny by-pos = NameorAny

[

position

]

position = 1*DIGIT attr-test =

@

att-name

=

att-value by-attr = NameorAny

[

attr-test

]

by-pos-attr = NameorAny

[

position

]

[

attr-test

]

NameorAny = QName /

*

; QName from XML Namespaces att-name = QName att-value = AttValue ; from XML specification attribute-selector =

@

att-nameRosenberg Expires April 16, 2007 [Page 18] Internet-Draft XCAP October 2006 namespace-selector =

namespace::*

extension-selector = 1*( %x00-2e / %x30-ff ) ; anything but

/

The QName grammar is defined in the XML namespaces [3] specification, and the AttValue grammar is defined in the XML specification XML 1.0 [1]. The extension-selector is included for purposes of extensibility. It can be composed of any character except the slash, which is the delimeter amongst steps. Any characters in an extension that cannot be represented in a URI MUST be percent-encoded before placement into a URI. Note that the double quote, left square bracket and right square bracket characters, which are meaningful to XCAP, cannot be directly represented in the HTTP URI. As a result, they are percent-encoded when placed within the HTTP URI. In addition to these characters, an apostrophe (

) character can be used as a delimiter within XPath expressions. Furthermore, since XML allows for non-ASCII characters, the names of elements and attributes may not be directly representable in a URI. Any such characters MUST be represented by converting them to an octet sequence corresponding to their representation in UTF-8, and then percent-encoding that sequence of octets. Similarly, the XML specification defines the QName production for the grammar for element and attribute names, and the AttValue production for the attribute values. Unfortunately, the characters permitted by these productions include some that are not allowed for pchar, which is the production for the allowed set of characters in path segments in the URI. The AttValue production allows many such characters within the US-ASCII set, including the space. Those characters MUST be percent- encoded when placed in the URI. Furthermore, QName and AttValue allow many Unicode characters, outside of US-ASCII. When these characters need to be represented in the HTTP URI, they are percent- encoded. To do this, the data should be encoded first as octets according to the UTF-8 character encoding [18] and then only those octets that do not correspond to characters in the pchar set should be percent-encoded. For example, the character A would be represented as

A

, the character LATIN CAPITAL LETTER A WITH GRAVE would be represented as

%C3%80

, and the character KATAKANA LETTER A would be represented as

%E3%82%A2

. As a result, the grammar above represents the expressions processed by the XCAP server internally after it has decoded the URI. The on- the-wire format is dictated by RFC 3986 [13]. In the discussions and examples below, when the node selectors are not part of an HTTP URI, they are presented in their internal format prior to encoding. If anRosenberg Expires April 16, 2007 [Page 19] Internet-Draft XCAP October 2006 example includes a node selector within an HTTP URI, it is presented in its percent-encoded form. The node selector is based on the concepts in XPath [10]. Indeed, the node selector expression, before it is percent-encoded for representation in the HTTP URI, happens to be a valid XPath expression. However, XPath provides a set of functionality far richer than is needed here, and its breadth would introduce much unneeded complexity into XCAP. To determine the XML element, attribute or namespace bindings selected by the node selector, processing begins at the root node of the XML document. The first step in the element selector is then taken. Each step chooses a single XML element within the current document context. The document context is the point within the XML document from which a specific step is evaluated. The document context begins at the root node of the document. When a step determines an element within that context, that element becomes the new context for evaluation of the next step. Each step can select an element by its name (expanded), by a combination of name and attribute value, by name and position, or by name, position and attribute. In all cases, the name can be wildcarded, so that all elements get selected. The selection operation operates as follows. Within the current document context, the children of that context are enumerated in document order. If the context is the root node of the document, its child element is the root element of the document. If the context is an element, its children are all of the children of that element (naturally). Next, those elements whose name is not a match for NameorAny are discarded. An element name is a match if NameorAny is the wildcard, or, if its not a wildcard, the element name matches NameorAny. Matching is discussed below. The result is an ordered list of elements. The elements in the list are further filtered by the predicates, which are the expressions in square brackets following NameorAny. Each predicate further prunes the elements from the current ordered list. These predicates are evaluated in order. If the content of the predicate is a position, the position-th element is selected (that is, treat

position

as a variable, and take the element whose position equals that variable), and all others are discarded. If there are fewer elements in the list than the value of position, the result is a no-match. If the content of the predicate is an attribute name and value, all elements possessing that attribute with that value are selected, and all others are discarded. Note that, although a document can haveRosenberg Expires April 16, 2007 [Page 20] Internet-Draft XCAP October 2006 namespace declarations within elements, those elements cannot be selected using a namespace declaration as a predicate. That is, a step like

el-name[@xmlns=

namespace

]

will never match an element, even if there is an element in the list that specifies a default namespace of

namespace

. In other words, a namespace node is NOT an attribute. If the namespaces in scope for an element are needed, they can be selected using the namespace-selector described below. If there are no elements with attributes having the given name and value, the result is a no-match. After the predicates have been applied, the result will be a no- match, one element, or multiple elements. If the result is multiple elements, the node selector is invalid. Each step in a node selector MUST produce a single element to form the context for the next step. This is more restrictive than general XPath expressions, which allow a context to contain multiple nodes. If the result is a no-match, the node selector is invalid. The node selector is only valid if a single element was selected. This element becomes the context for the evaluation of the next step in the node selector expression. The last location step is either the previously described element selector or a

terminal selector

. If the terminal selector is an attribute selector, the server checks to see if there is an attribute with the same expanded name in the current element context. If there is not, the result is considered a no-match. Otherwise, that attribute is selected. If the terminal selector is a namespace selector, the result is equal to the set of namespace bindings in scope for the element, including the possible default namespace declaration. This specification defines a syntax for representing namespace bindings, so they can be returned to the client in an HTTP response. As a result, once the entire node selector is evaluated against the document, the result will either be a no-match, invalid, a single element, a single attribute or a set of namespace bindings. Matching of element names is performed as follows. The element being compared in the step has its name expanded as described in XML namespaces [3]. The element name in the step is also expanded. This expansion requires that any namespace prefix is converted to its namespace URI. Doing that requires a set of bindings from prefixes to namespace URIs. This set of bindings is obtained from the query component of the URI (see Section 6.4). If the prefix of the QName of an element is empty, the corresponding URI is then the default document namespace URI defined by the application usage, or null if not defined. Comparisons are then performed as described in XML namespaces [3]. Note that the namespace prefix expansions described here are different than those specified in the XPath 1.0Rosenberg Expires April 16, 2007 [Page 21] Internet-Draft XCAP October 2006 specification, but are closer to those currently defined by the XPath 2.0 specification [24]. Matching of attribute names proceeds in a similar way. The attribute in the document has its name expanded as described in XML namespaces [3]. If the attribute name in the attribute selector has a namespace prefix, its name is expanded using the namespace bindings obtained from the query component of the URI. An unprefixed attribute QName is in no namespace. Comments, text content (including whitespace), and processing instructions can be present in a document, but cannot be selected by the expressions defined here. Of course, if such information is present in a document, and a user selects an XML element enclosing that data, that information would be included in a resulting GET, for example. Furthermore, whitespace is respected by XCAP. If a client PUTs an element or document that contains whitespace, the server retains that whitespace, and will return the element or document back to the client with exactly the same whitespace. Similarly, when an element is inserted, no additional whitespace is added around the inserted element, and the element gets inserted in a very specific location relative to any whitespace, comments or processing instructions around it. Section 8.2.3 describes where the insertion occurs. As an example, consider the following XML document:

?xml version=

1.0

?

watcherinfo xmlns=

urn:ietf:params:xml:ns:watcherinfo

version=

0

state=

full

watcher-list resource=

sip:professor@example.net

package=

presence

watcher status=

active

id=

8ajksjda7s

duration-subscribed=

509

event=

approved

sip:userA@example.net

/watcher

watcher status=

pending

id=

hh8juja87s997-ass7

display-name=

Mr. Subscriber

event=

subscribe

sip:userB@example.org

/watcher

/watcher-list

/watcherinfo

Figure 3: Example XML Document Assuming that the default document namespace for this application usage is

urn:ietf:params:xml:ns:watcherinfo

, the node selectorRosenberg Expires April 16, 2007 [Page 22] Internet-Draft XCAP October 2006 watcherinfo/watcher-list/watcher[@id=

8ajksjda7s

] would select the following XML element:

watcher status=

active

id=

8ajksjda7s

duration-subscribed=

509

event=

approved

sip:userA@example.net

/watcher

6.4. Namespace Bindings for the Selector In order to expand the namespace prefixes used in the node selector, a set of bindings from those namespace prefixes to namespace URI must be used. Those bindings are contained in the query component of the URI. If no query component is present, it means that only the default document namespace (as identified by the application usage) is defined. The query component is formatted as a valid xpointer expression [5] after suitable URI encoding as defined in Section 4.1 of the Xpointer framework. This xpointer expression SHOULD only contain expressions from the xmlns() scheme [4]. A server compliant to this specification MUST ignore any xpointer expressions not from the xmlns() scheme. The xmlns() xpointer expressions define the set of namespace bindings in use for evaluating the URI. Note that xpointer expressions were originally designed for usage within fragment identifiers of URIs. However, within XCAP, they are used within query components of URIs. The following example shows a more complex matching operation, this time including the usage of namespace bindings. Consider the following document:

?xml version=

1.0

?

foo xmlns=

urn:test:default-namespace

ns1:bar xmlns:ns1=

urn:test:namespace1-uri

xmlns=

urn:test:namespace1-uri

baz/

ns2:baz xmlns:ns2=

urn:test:namespace2-uri

/

/ns1:bar

ns3:hi xmlns:ns3=

urn:test:namespace3-uri

there/

/ns3:hi

/foo

Assume that this document has a document URI of

http://xcap.example.com/test/users/sip:joe@example.com/index

, where

test

is the application usage. This application usage defines aRosenberg Expires April 16, 2007 [Page 23] Internet-Draft XCAP October 2006 default document namespace of

urn:test:default-namespace

. The XCAP URI: http://xcap.example.com/test/users/sip:joe@example.com/index/ ~~/foo/a:bar/b:baz?xmlns(a=urn:test:namespace1-uri) xmlns(b=urn:test:namespace1-uri) will select the first

baz

child element of the

bar

element in the document. The XCAP URI: http://xcap.example.com/test/users/sip:joe@example.com/index/ ~~/foo/a:bar/b:baz?xmlns(a=urn:test:namespace1-uri) xmlns(b=urn:test:namespace2-uri) will select the second

baz

child element of the

bar

element in the document. The following XCAP URI will also select the second element in the document: http://xcap.example.com/test/users/sip:joe@example.com/index/ ~~/d:foo/a:bar/b:baz?xmlns(a=urn:test:namespace1-uri) xmlns(b=urn:test:namespace2-uri) xmlns(d=urn:test:def